Slider

THERMAL ISOLATION:

EXTERNAL

KOFATERM WHITE UNIVERSAL (white thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by one of the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.04, and the highest thermal resistance with a coefficient  Ri 1.1.

KOFATERM WHITE UNIVERSAL is an ecological product based on water dispersions.

 

Other properties of the coating:

  • high resistance to temperatures from -50 ° C to 160 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
    • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

  

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The mass works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, but also in food industry facilities or hospitals.

- It is best to use it on concrete, brick, stone, metal and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

- It can also be used as thermal insulation of corrosion-protected tanks, cold and hot  cisterns, containers, thermal pipelines, including valves, cams etc.

 

 

At constant higher temperatures (in the range of 160-260 ° C), one of the KOFATERM GRAY thermal insulation masses should be used as the first layer to lower the surface temperature, after that the KOFATERM WHITE mass should be used.

KOFATERM WHITE ANTIRUST (anti-corrosion thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by one of the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.04, and the highest thermal resistance with a coefficient  Ri 1.1.

KOFATERM WHITE ANTIRUST is an ecological product based on water dispersions.

The greates advantage of KOFATERM WHITE ANTIRUST is its high anti-corrosive properties, which allows it to be applied directly to cleaned and degreased metal.

 

Other properties of the coating:

  • high resistance to temperatures from -50 ° C to 160 ° C,
  • anticorrosive,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
    • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

 

 

Application:

KOFATERM WHITE ANTIRUST mass has dual applications, provides anti-corrosion and thermal insulation.

- Mass protects the metal against corrosion and the effects of external factors on the  surface, leaving it resistant to moisture, water and other atmospheric factors.

- It maximally insulates metal objects, limiting all ways of heat transfer outside the coating, thus reducing the impact of high temperatures on metal elements and blocking heat penetration towards the metal.

- The applied coating, in the case of cold tanks, insulates them from heating from outside by reflecting heat from the surface, while in the case of hot tanks, it reduces their cooling rate by reflecting heat inside and accumulating them inside.

- The mass works perfectly as thermal insulation of unprotected steel halls, cranes, ships, tanks, hot and cold cisterns, containers, pipelines, including valves, cams, etc.

- In cases where the metal is very frozen, it does not cause frostbite on skin contact.

 

At constant higher temperatures (in the range of 160-260 ° C), apply KOFATERM GRAY ANTIRUST thermal insulation mass on the metal as the first layer to lower the surface temperature, and then apply KOFATERM WHITE ANTIRUST.

KOFATERM WHITE BIOSTATIC (biostatic white thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by one of the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.04, and the highest thermal resistance with a coefficient  Ri 1.1.

KOFATERM WHITE BIOSTATIC is an ecological product based on water dispersions.

 

Other properties of the coating:

  • biostatic,
  • high resistance to temperatures from -50 ° C to 160 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
    • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The mass works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, but also in food industry facilities or hospitals.

- The coating has biostatic properties, prevents the formation of molds and fungi on the walls, thus it works perfectly in closed rooms with high humidity, such as kitchens, bathrooms, but also production halls, e.g. in the food industry or rooms for animal husbandry.

- It is best to use it on concrete, brick, stone, metal and wooden surfaces inside the buildings regardless of the variety of shapes.

KOFATERM INDUSTRIAL UNIVERSAL (industrial thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.03, and the highest thermal resistance with a coefficient  Ri close to 1.

KOFATERM INDUSTRIAL UNIVERSAL is an ecological product based on water dispersions.

 

Other properties of the coating:

  • resistance to temperatures from -50 ° C to 250 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • increased abrasion resistance,
  • increased coating hardness,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
  • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The coating is characterized by increased abrasion resistance, hardness, resistance to higher temperatures, and slightly better thermal insulation properties compared to KOFATERM WHITE coatings.

- The mass is perfect for production halls, warehouses, in rooms used for animal husbandry, but also in food industry facilities.

- It is best to use it on concrete, brick, stone and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

- Can also be used as thermal insulation for corrosion-protected tanks, cold and hot tanks, containers, thermal pipelines, including valves, cams, etc.

KOFATERM INDUSTRIAL ANTIRUST (anti-corrosive, industrial thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.03, and the highest thermal resistance with a coefficient  Ri close to 1. 

KOFATERM INDUSTRIAL ANTIRUST is an ecological product based on water dispersions.

 

The biggest advantage of KOFATERM INDUSTRIAL ANTIRUST is its high anti-corrosion properties, which allows it to be applied directly to cleaned and degreased metal.

 

Other properties of the coating:

  • resistance to temperatures from -50 ° C to 250 ° C,
  • anticorrosive,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • increased abrasion resistance,
  • increased coating hardness,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
  • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

 

 

Application:

KOFATERM INDUSTRIAL ANTIRUST mass has dual applications, provides anti-corrosion and thermal insulation.

- The coating is characterized by increased abrasion resistance, hardness, resistance to higher temperatures, and slightly better thermal insulation properties compared to KOFATERM WHITE coatings.

- The mass protects the metal against corrosion and external influences on its surface, leaving it resistant to moisture, water and other atmospheric factors.

- It maximally insulates metal objects, limiting all ways of heat transfer outside the coating, thus reducing the impact of high temperatures on metal elements and blocking heat penetration towards the metal.

- - The applied coating, in the case of not protected against corrosion cold tanks, insulates them from heating from outside by reflecting heat from the surface, while in the case of hot tanks, it reduces their cooling rate by reflecting heat inside and accumulating them inside.

- The mass works perfectly as thermal insulation of unprotected against corrosion steel halls, cranes, ships, tanks, hot and cold cisterns, containers, pipelines, including valves, cams, etc.

- In cases where the metal is very frozen, it does not cause frostbite on skin contact.

KOFATERM INDUSTRIAL BIOSTATIC (biostatic industrial thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.03, and the highest thermal resistance with a coefficient  Ri close to 1. 

KOFATERM INDUSTRIAL BIOSTATIC is an ecological product based on water dispersions.

 

Other properties of the coating:

  • biostatic,
  • resistance to temperatures from -50 ° C to 250 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • increased abrasion resistance,
  • increased coating hardness,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
  • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

 

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The coating is characterized by increased abrasion resistance, hardness, resistance to higher temperatures, and slightly better thermal insulation properties compared to KOFATERM WHITE coatings.

- The mass is perfect for production halls, warehouses, in rooms used for animal husbandry, but also in food industry facilities and hospitals.

- The coating has biostatic properties, prevents the formation of molds and fungi on the walls, thus it works perfectly in closed rooms with high humidity, such as restaurants kitchens, bathrooms, production halls with high humidity, dairy industry, food industry or rooms for animal husbandry.

- It's best to use it on concrete, brick, stone, metal and wooden surfaces regardless of the variety of shapes inside the buildings.

INDUSTRIAL PAINTS:

KOFASYD 2K-primer (two-component epoxy primer)

Properties:

Used as a first layer of the most resistant anticorrosion coating in the group. It maximally activates and prepares the metal surface before applying as a top coat KOFAPUR 2K varnish.

The pigments used in the paint do not contain lead and chromates.

Available in colors: red-brown, beige, gray, black, other colors for orders over 200 liters after determining the price.

Full protection is obtained by using the system of KOFASYD 2K  in combination with KOFAPUR 2K!

 

Other properties of the coating:

  • anticorrosion C3 (with the second layer KOFAPUR 2K, anticorrosion increases to C4),
  • corrosion protection for 2 years (with the second layer KOFAPUR 2K, corrosion protection increases to 12 years),
  • high mechanical resistance,
  • high resistance to chemical agents,
  • high adhesion to the substrate,
  • waterproof,
  • temperature resistance up to 150 ° C,
  • bending resistance.

 

 

 

Application:

 

The highest quality and durability primer used in difficult conditions of the facility, mainly intended for industrial applications.

In combination with KOFAPUR 2K, it protects all metal surfaces against the adverse effects of water, acid vapors, oil derivatives and sea breeze for a long time.

The 2K system is perfect for industrial halls, facilities with high humidity, cranes, steel bridges, drilling platforms, tanks, pipelines, hot and cold cisterns, etc.

 

Application: brush, roller or spray on previously cleaned and degreased surfaces.

KOFAPUR 2K-surface (two-component polyurethane topcoat varnish)

Properties:

Used as the second, finishing layer of the 2K system - the most resistant anti-corrosion coating in the group, when applied directly to the KOFASYD 2K primer.

The pigments used in the paint do not contain lead and chromates.

Available in colors: red, brown, gray, black, blue, green, yellow, other colors for orders over 200 liters after determining the price.

Full protection is obtained by using the system of KOFASYD 2K  in combination with KOFAPUR 2K!

 

 

Other properties of the coating:

  • anticorrosion C2 (with the KOFASYD 2K primer, anticorrosion increases to C4),
  • corrosion protection for 2 years (with the KOFASYD 2K primer, corrosion protection increases to 12 years),
  • high mechanical resistance,
  • high abrasion resistance,
  • high resistance to chemical agents,
  • high adhesion to the substrate,
  • temperature resistance up to 150 ° C,
  • waterproof,
  • resistance to UV and IR radiation,
  • bending resistance.

 

 

 

 

Application:

 

The highest quality and durability varnish used in difficult conditions of the facility, mainly intended for industrial applications.

In combination with KOFASYD 2 K, it protects all metal surfaces against the adverse effects of water, acid vapors, oil derivatives and sea breeze for a long time.

The 2K system is perfect for industrial halls, facilities with high humidity, cranes, steel bridges, drilling platforms, tanks, pipelines, hot and cold cisterns, etc.

 

Application: brush, roller or spray on a surface covered with KOFASYD 2K primer.

KOFAKOR ANTIRUST (composite priming enamel 2in1)

Properties:

The paint providing high corrosion resistance, for use directly on degreased metal, including metal with a thin rust coating, which is chemically activated, permanently embedded in the paint structure. 

Does not require a primer.

The pigments used in the paint do not contain lead and chromates.

Available in colors: red, brown, gray, black, blue, green, yellow, other colors for orders over 200 liters after determining the price.

 

 

Other properties of the coating:

  • anticorrosion C4,
  • corrosion protection up to 8 years,
  • high mechanical resistance,
  • high abrasion resistance,
  • high resistance to chemical agents,
  • high adhesion to the substrate,
  • waterproof,
  • resistance to UV and IR radiation,
  • bending resistance.

 

 

 

 

Application:

 

High-quality and durable modern decorative paint, used in difficult conditions of the facility, intended for industrial applications, but also works perfectly in households.

Long-term (up to 8 years) protects all metal surfaces against the adverse effects of water, acid vapors, oil derivatives, sea breeze, but also against UV and IR radiation and changing weather conditions.

The coating creates a smooth surface resistant to vibration as well as to abrasion and mechanical damage.

Works well in industrial halls, cranes, steel bridges, drilling platforms, tanks, pipelines, cisterns, etc.

 

Application: brush, roller or spray on previously degreased surfaces.

KOFAL ANTIRUST (silver anticorrosive paint)

Properties:

Paint for protective and decorative painting of all surfaces, resistant to adverse environmental and operating conditions.

 

 

Other properties of the coating:

  • anticorrosion C3,
  • corrosion protection up to 3 years,
  • high mechanical resistance,
  • high abrasion resistance,
  • high resistance to chemical agents,
  • high adhesion to the substrate,
  • waterproof,
  • resistance to UV and IR radiation,
  • bending resistance.

 

 

 

 

Application:

 

High-quality and durable modern decorative paint, intended for industrial applications, but also works perfectly in households.

It is a decorative paint with a deep silver color, perfectly providing the effect of a metal surface, especially an aluminum surface.

It protects all non-metallic and metal surfaces against the adverse effects of water, acid vapors, oil derivatives, sea breeze, but also against UV and IR radiation and changing weather conditions.

 

Application: brush, roller or spray on previously degreased surfaces.

KOFAPOD (alkyd primer)

Properties:

Used as the first layer of anti-corrosion coating for finishing paints from the group of alkyl, chlorinated rubber or polyurethane paints.

The pigments used in the paint do not contain lead and chromates.

Available in colors: oxide red, light beige, gray, black, other colors for orders over 200 liters after determining the price.

 

 

Other properties of the coating:

  • temporary corrosion protection up to 1 years,
  • mechanical resistance,
  • high adhesion to the substrate,
  • bending resistance.

 

 

 

Application:

 

The primer, which due to low costs is used as a temporary anti-corrosion protection for steel and cast iron surfaces.

It is perfect for protecting metal surfaces against corrosion during transport or storage.

Applying a finishing coat of alkyd, chlorinated rubber or polyurethane paint to the primer extends the corrosion protection to 2-3 years.

 

Application: brush, roller or spray on previously cleaned and degreased surfaces.

KOFARUB (chlorinated rubber paint)

Properties:

High-quality protective coating with very wide application both in industry and in households.

The pigments used in the paint do not contain lead and chromates.

Available in colors: red, brown, gray, black, blue, green, yellow, other colors for orders over 200 liters after determining the price.

 

Other properties of the coating:

  • durability up to 2 years,
  • mechanical resistance,
  • abrasion resistance,
  • resistance to chemical agents,
  • adhesion to the substrate,
  • waterproof,
  • resistance to UV and IR radiation,
  • bending resistance.

 

 

 

Application:

 

A decorative coating that protects all types of surfaces for a long time, including concrete, wood, metal.

It is characterized by high resistance to impact, scratches and aggressive urban and industrial atmosphere.

The coating is resistant to sunlight, especially to IR and UV radiation. Provides color durability and intensity for a minimum 2 years.

To obtain long-term protection on metal, one of the available primer is required: KOFASYD or KOFAPOD.

 

Application: brush, roller or spray on previously degreased and matted surfaces.

SOLUTIONS:

Company's data:

PRODUCENT
KOFARB Sp. z o.o.
ul. Jagiellońska 85/87
42-200 Częstochowa

Telefony:
+48 605 342 957
+48 608 404 365
+48 509 101 707 (EN)
+48 34 367 46 06

kofarb@o2.pl

KOFARB INNOWACJE I NOWOCZESNOŚĆ W TERMOIZOLACJI SPRZEDAŻ PRODUKTÓW Sp. z o.o.
ul. Głogowska 100/6
60-263 Poznań

Adam Brandyk
+48 721 776 327

Łukasz Firlej
+48 667 453 878

dystrybucja.kofarb@o2.pl
kofarb-zamowienia@o2.pl

 

Przedstawiciele handlowi
(DYSTRYBUTORZY)

KOFARB DYSTRYBUCJA
ul. Jagiellońska 85/87
42-200 Częstochowa Poland

office@kofarb-dystrybucja.pl

+48 607 055 931 – (RU)
mareks@kofarb-dystrybucja.pl

+48 535 765 331-(IT,EN)
jang@kofarb-dystrybucja.pl

+48 664 283 407 – (AR,EN)
omar@kofarb-dystrybucja.pl

INSTYTUT NOWOCZESNYCH TECHNOLOGII Sp. z o.o.
ul. Obarowska 25/4,
04-337 WARSZAWA
+48 604 957 257
+48 666 318 005
chabior.grzegorz@gmail.com

HELIO Kamil Nowacki
ul. Górna 47
42-274 Aleksandria 1
+ 48 537 444 653
kamil_nowacki@vp.pl

MAP Andrzej Pachucki
ul. Borowa 2/6
41-808 Zabrze
+48 503 085 598
magdalena.pachucka@op.pl

Access map:

Useful links:

  • Contact form
  • Sitemap
  • Privacy Policy
  • Regulations