Slider

THERMAL ISOLATION

OUR OFFER:

KOFATERM GRAY UNIVERSAL (gray thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element. It is characterized by a significant reflection of the IR heat wave, low thermal conductivity with a coefficient λ close to 0.1, and thermal resistance with a coefficient
Ri 0.5.

KOFATERM GRAY UNIVERSAL is an ecological product based on water dispersions.

 

Other properties of the coating:

  • high resistance to temperatures from -50 ° C to 260 ° C,
    • high adhesion to the ground,
    • high abrasion resistance,
    • high coating hardness,
    • vapor permeability,
    • waterproof,
    • insulation stability in high humidity conditions,
    • resistance to weather conditions and UV radiation.

  

Application:

- The coating is characterized by increased abrasion resistance and hardness.

- It thermally insulates the object, reducing all ways of heat transfer outside the coating, thus reducing the costs of using air conditioning in a hot climate, and reducing heating costs in a cold climate.

- The mass works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, and as a foundation insulation.

- It is best to use it on concrete, brick, stone, metal and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

- It can also be used as the first layer for thermal insulation of corrosion-protected hot tanks, cisterns, thermal pipelines, including valves, cams etc.

 

At constant higher temperatures (in the range of 160-260 ° C) this mass is used as the first layer, lowering the temperature before using masses with higher thermal insulation:  KOFATERM WHITE, or KOFATERM INDUSTRIAL.

KOFATERM GRAY ANTIRUST (gray anti-corrosion thermal insulation mass)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element. It is characterized by a significant reflection of the IR heat wave, low thermal conductivity with a coefficient λ close to 0.1, and thermal resistance with a coefficient
Ri 0.5.

KOFATERM GRAY UNIVERSAL is an ecological product based on water dispersions.

 

Other properties of the coating:

  • high resistance to temperatures from -50 ° C to 260 ° C,
  • anticorrosive,
  • high adhesion to the ground,
    • high abrasion resistance,
    • high coating hardness,
    • vapor permeability,
    • waterproof,
    • insulation stability in high humidity conditions,
    • resistance to weather conditions and UV radiation.

  

 

 

Application:

- The coating is characterized by increased abrasion resistance and hardness.

- The mass protects the metal against corrosion and external influences on its surface, leaving it resistant to moisture, water and other atmospheric factors.

- Works best for thermal insulation of unprotected against corrosion hot and cold tanks, cisterns, thermal pipelines, including valves, cams, etc.

- The applied coating, in the case of cold tanks, insulates them from heating from outside by reflecting heat from the surface, while in the case of hot tanks, it reduces their cooling rate by reflecting heat inside and accumulating them inside.

 

 

At constant higher temperatures (in the range of 160-260 ° C) used as the first layer, lowering the temperature before using masses with higher thermal insulation: KOFATERM WHITE or KOFATERM INDUSTRIAL.

KOFATERM GRAY BIOSTATIC (biostatic grey thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element. It is characterized by a significant reflection of the IR heat wave, low thermal conductivity with a coefficient λ close to 0.1, and thermal resistance with a coefficient
Ri 0.5.  

KOFATERM GRAY BIOSTATIC is an ecological product based on water dispersions.

 

 

Other properties of the coating:

  • biostatic,
  • high resistance to temperatures from -50 ° C to 260 ° C,
  • high adhesion to the ground,
    • high abrasion resistance,
    • high coating hardness,
    • vapor permeability,
    • waterproof,
    • insulation stability in high humidity conditions,
    • resistance to weather conditions and UV radiation.

 

  

 

Application:

- KOFATERM GRAY BIOSTATIC has biostatic properties, prevents the formation of molds and fungi on the walls, thus it works perfectly in closed rooms with high humidity, such as kitchens, bathrooms, but also production halls, e.g. in the food industry or rooms for animal husbandry, and as insulation of foundations.

- It is best to use it on concrete, brick, stone, metal and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

-  The coating is characterized by increased abrasion resistance and hardness.

- It thermally insulates the object, reducing all ways of heat transfer outside the coating, thus reducing the costs of using air conditioning in a hot climate, and reducing heating costs in a cold climate.

- The mass works perfectly on residential buildings, production halls, storage halls, and in rooms used for animal husbandry.

KOFATERM WHITE UNIVERSAL (white thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by one of the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.04, and the highest thermal resistance with a coefficient  Ri 1.1.

KOFATERM WHITE UNIVERSAL is an ecological product based on water dispersions.

 

Other properties of the coating:

  • high resistance to temperatures from -50 ° C to 160 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
    • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

  

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The mass works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, but also in food industry facilities or hospitals.

- It is best to use it on concrete, brick, stone, metal and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

- It can also be used as thermal insulation of corrosion-protected tanks, cold and hot  cisterns, containers, thermal pipelines, including valves, cams etc.

 

 

At constant higher temperatures (in the range of 160-260 ° C), one of the KOFATERM GRAY thermal insulation masses should be used as the first layer to lower the surface temperature, after that the KOFATERM WHITE mass should be used.

KOFATERM WHITE ANTIRUST (anti-corrosion thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by one of the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.04, and the highest thermal resistance with a coefficient  Ri 1.1.

KOFATERM WHITE ANTIRUST is an ecological product based on water dispersions.

The greates advantage of KOFATERM WHITE ANTIRUST is its high anti-corrosive properties, which allows it to be applied directly to cleaned and degreased metal.

 

Other properties of the coating:

  • high resistance to temperatures from -50 ° C to 160 ° C,
  • anticorrosive,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
    • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

 

 

Application:

KOFATERM WHITE ANTIRUST mass has dual applications, provides anti-corrosion and thermal insulation.

- Mass protects the metal against corrosion and the effects of external factors on the  surface, leaving it resistant to moisture, water and other atmospheric factors.

- It maximally insulates metal objects, limiting all ways of heat transfer outside the coating, thus reducing the impact of high temperatures on metal elements and blocking heat penetration towards the metal.

- The applied coating, in the case of cold tanks, insulates them from heating from outside by reflecting heat from the surface, while in the case of hot tanks, it reduces their cooling rate by reflecting heat inside and accumulating them inside.

- The mass works perfectly as thermal insulation of unprotected steel halls, cranes, ships, tanks, hot and cold cisterns, containers, pipelines, including valves, cams, etc.

- In cases where the metal is very frozen, it does not cause frostbite on skin contact.

 

At constant higher temperatures (in the range of 160-260 ° C), apply KOFATERM GRAY ANTIRUST thermal insulation mass on the metal as the first layer to lower the surface temperature, and then apply KOFATERM WHITE ANTIRUST.

KOFATERM WHITE ROOF (thermal insulation coating for roofs)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by one of the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.04, and the highest thermal resistance with a coefficient  Ri 1.1.

KOFATERM WHITE ROOF is an ecological product based on water dispersions.

 

 

Other properties of the coating:

  • increased resistance to weather conditions and UV radiation,
  • high resistance to temperatures from -50 ° C to 160 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • increased resistance to mechanical damage,
  • increasing the tightness of the roofing,
  • eliminating the dew point,
  • high resistance against water,
    • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction.

 

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The mass works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, but also in food industry facilities or hospitals.

- For application on all types of roof surfaces, including concrete, ceramics, bituminous materials, metals and wood regardless of the diversity of shape.

- The coating perfectly silences the noises associated with atmospheric precipitation, dampening the sounds of hail or rain impacts on the roof surface.

- Increased mechanical resistance allows moving on the roof surface for inspection and renovation purposes.

 

 

In order to achieve maximum thermal insulation of the building, it is recommended to use KOFATERM WHITE ROOF on the roof and KOFATERM UNIVERSAL on the walls.

KOFATERM WHITE BIOSTATIC (biostatic white thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by one of the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.04, and the highest thermal resistance with a coefficient  Ri 1.1.

KOFATERM WHITE BIOSTATIC is an ecological product based on water dispersions.

 

Other properties of the coating:

  • biostatic,
  • high resistance to temperatures from -50 ° C to 160 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
    • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The mass works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, but also in food industry facilities or hospitals.

- The coating has biostatic properties, prevents the formation of molds and fungi on the walls, thus it works perfectly in closed rooms with high humidity, such as kitchens, bathrooms, but also production halls, e.g. in the food industry or rooms for animal husbandry.

- It is best to use it on concrete, brick, stone, metal and wooden surfaces inside the buildings regardless of the variety of shapes.

KOFATERM WHITE TECHNICAL (technical heat-insulating coating, chemically resistant)

Properties:

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by one of the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.04, and the highest thermal resistance with a coefficient  Ri 1.1.

KOFATERM WHITE TECHNICAL is an ecological product based on water dispersions.

 

Other properties of the coating:

  • resistance to petroleum products and acid vapors,
  • high resistance to temperatures from -50 ° C to 160 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
    • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

 

 

Application:

- The mass intended for work in a difficult environment. The coating is resistant to chemical agents such as: grease, petroleum products, acid vapors, sea breeze salts, etc.

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The mass works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, but also in food industry facilities or hospitals.

- It is best to use it on concrete, brick, stone, metal and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

- Can also be used as thermal insulation for tanks, cold and hot cisterns, containers, thermal pipelines, including valves, cams, etc.

 

At constant higher temperatures (in the range of 160-260 ° C), one of the KOFATERM GRAY thermal insulation masses should be used as the first layer to lower the substrate temperature, and after that the KOFATERM WHITE TECHNICAL mass should be used.

KOFATERM PAINT (thermal insulation paint)

Properties:

The 0.3-0.5 mm thick thermal insulation coating reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by very high IR heat wave reflection (reflection to 90%).

KOFATERM PAINT is an ecological product based on water dispersions.

 

Other properties of the coating:

  • resistance to temperatures from -50 ° C to 160 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • elimination of microcracks of the substrate,
  • ease of application,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • resistance to weather conditions and UV radiation.

 

 

 

Application:

- It perfectly reflects the heat wave emitted from a point source of heat, accumulating it inside the building, significantly reducing heat flow outside the coating. Accumulated heat increases the temperature inside the room in the range of 4 to 7 ° C
(depending on the conditions) with the same heat source parameters.

- It limits thermal convection, equalizing the temperature inside the room and reducing temperature differences at various points in the room to
1-1.5 ° C, which significantly improves the comfort of living in the room.

- The paint works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, but also in food industry facilities or hospitals.

- It is best to use it on concrete, brick, stone and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

- The paint has a thixotropic consistency, similar to traditional decorative paint, and can be applied in a similar way.

- Outdoor use fully protects against heat wave penetration into the wall surface but due to the thickness of the coating and connected with this thermal resistance it does not fully thermally isolate like the KOFATERM WHITE mass.

 

 

Each subsequent layer of KOFATERM PAINT increases the thickness of the coating, which enhances thermal insulation by increasing its thermal resistance and thereby reducing thermal conductivity.

 

When reaching a coating thickness of 1-2 mm KOFATERM PAINT,  thermal insulation properties may be obtained very similar to KOFATERM WHITE masses.

KOFATERM PAINT BIOSTATIC (biostatic thermal insulation paint)

Properties:

 

The 0.3-0.5 mm thick thermal insulation coating reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by very high IR heat wave reflection (reflection to 90%).

KOFATERM PAINT BIOSTATIC is an ecological product based on water dispersions.

 

Other properties of the coating:

  • biostatic,
  • resistance to temperatures from -50 ° C to 160 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • flexibility,
  • elimination of microcracks of the substrate,
  • ease of application,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • resistance to weather conditions and UV radiation.

 

 

 

Application:

- It perfectly reflects the heat wave emitted from a point source of heat, accumulating it inside the building, significantly reducing heat flow outside the coating. Accumulated heat increases the temperature inside the room in the range of 4 to 7 ° C
(depending on the conditions) with the same heat source parameters.

- It limits thermal convection, equalizing the temperature inside the room and reducing temperature differences at various points in the room to
1-1.5 ° C, which significantly improves the comfort of living in the room.

- The paint works perfectly on residential buildings, production halls, storage halls, in rooms used for animal husbandry, but also in food industry facilities or hospitals.

- It is best to use it on concrete, brick, stone and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

- The coating has biostatic properties, prevents the formation of molds and fungi on the walls, thus it works perfectly in closed rooms with high humidity, such as kitchens, bathrooms but also production halls, e.g. in the food industry or rooms for animal husbandry.

- The paint has a thixotropic consistency, similar to traditional decorative paint, and can be applied in a similar way.

 

Each subsequent layer of KOFATERM PAINT BIOSTATIC increases the thickness of the coating, which enhances thermal insulation by increasing its thermal resistance and thereby reducing thermal conductivity.

 

When reaching a coating thickness of 1-2 mm KOFATERM PAINT BIOSTATIC,  thermal insulation properties may be obtained very similar to KOFATERM WHITE masses.

KOFATERM INDUSTRIAL UNIVERSAL (industrial thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.03, and the highest thermal resistance with a coefficient  Ri close to 1.

KOFATERM INDUSTRIAL UNIVERSAL is an ecological product based on water dispersions.

 

Other properties of the coating:

  • resistance to temperatures from -50 ° C to 250 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • increased abrasion resistance,
  • increased coating hardness,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
  • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

  

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The coating is characterized by increased abrasion resistance, hardness, resistance to higher temperatures, and slightly better thermal insulation properties compared to KOFATERM WHITE coatings.

- The mass is perfect for production halls, warehouses, in rooms used for animal husbandry, but also in food industry facilities.

- It is best to use it on concrete, brick, stone and wooden surfaces regardless of the variety of shapes, both inside and outside of buildings.

- Can also be used as thermal insulation for corrosion-protected tanks, cold and hot tanks, containers, thermal pipelines, including valves, cams, etc.

KOFATERM INDUSTRIAL ANTIRUST (anti-corrosive, industrial thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.03, and the highest thermal resistance with a coefficient  Ri close to 1. 

KOFATERM INDUSTRIAL ANTIRUST is an ecological product based on water dispersions.

 

The biggest advantage of KOFATERM INDUSTRIAL ANTIRUST is its high anti-corrosion properties, which allows it to be applied directly to cleaned and degreased metal.

 

Other properties of the coating:

  • resistance to temperatures from -50 ° C to 250 ° C,
  • anticorrosive,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • increased abrasion resistance,
  • increased coating hardness,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
  • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

 

 

Application:

KOFATERM INDUSTRIAL ANTIRUST mass has dual applications, provides anti-corrosion and thermal insulation.

- The coating is characterized by increased abrasion resistance, hardness, resistance to higher temperatures, and slightly better thermal insulation properties compared to KOFATERM WHITE coatings.

- The mass protects the metal against corrosion and external influences on its surface, leaving it resistant to moisture, water and other atmospheric factors.

- It maximally insulates metal objects, limiting all ways of heat transfer outside the coating, thus reducing the impact of high temperatures on metal elements and blocking heat penetration towards the metal.

- - The applied coating, in the case of not protected against corrosion cold tanks, insulates them from heating from outside by reflecting heat from the surface, while in the case of hot tanks, it reduces their cooling rate by reflecting heat inside and accumulating them inside.

- The mass works perfectly as thermal insulation of unprotected against corrosion steel halls, cranes, ships, tanks, hot and cold cisterns, containers, pipelines, including valves, cams, etc.

- In cases where the metal is very frozen, it does not cause frostbite on skin contact.

KOFATERM INDUSTRIAL BIOSTATIC (biostatic industrial thermal insulation coating)

Properties:

 

Thermal insulation coating 1-2 mm thick reduces the heat exchange of the insulated element by limiting to nearly 0% thermal convection. It is characterized by the highest IR heat wave reflection in the group (reflection up to 90%), the lowest thermal conductivity in the group with an λ factor close to 0.03, and the highest thermal resistance with a coefficient  Ri close to 1. 

KOFATERM INDUSTRIAL BIOSTATIC is an ecological product based on water dispersions.

 

Other properties of the coating:

  • biostatic,
  • resistance to temperatures from -50 ° C to 250 ° C,
  • elimination of thermal bridges,
  • high adhesion to the ground,
  • increased abrasion resistance,
  • increased coating hardness,
  • vapor permeability,
  • elimination of condensation, thereby eliminating the dew point,
  • waterproof,
  • insulation stability in high humidity conditions,
  • acoustic insulation - noise reduction,
  • resistance to weather conditions and UV radiation.

 

 

Application:

- It maximally insulates the object, limiting all ways of heat transfer outside the coating, thus reducing the cost of using air conditioning in a hot climate, and reducing heating costs in a cold climate by 40%.

- The coating is characterized by increased abrasion resistance, hardness, resistance to higher temperatures, and slightly better thermal insulation properties compared to KOFATERM WHITE coatings.

- The mass is perfect for production halls, warehouses, in rooms used for animal husbandry, but also in food industry facilities and hospitals.

- The coating has biostatic properties, prevents the formation of molds and fungi on the walls, thus it works perfectly in closed rooms with high humidity, such as restaurants kitchens, bathrooms, production halls with high humidity, dairy industry, food industry or rooms for animal husbandry.

- It's best to use it on concrete, brick, stone, metal and wooden surfaces regardless of the variety of shapes inside the buildings.

SOLUTIONS:

Company's data:

PRODUCENT
KOFARB Sp. z o.o.
ul. Jagiellońska 85/87
42-200 Częstochowa

Telefony:
+48 605 342 957
+48 608 404 365
+48 509 101 707 (EN)
+48 34 367 46 06

kofarb@o2.pl

KOFARB INNOWACJE I NOWOCZESNOŚĆ W TERMOIZOLACJI SPRZEDAŻ PRODUKTÓW Sp. z o.o.
ul. Głogowska 100/6
60-263 Poznań

Adam Brandyk
+48 721 776 327

Łukasz Firlej
+48 667 453 878

dystrybucja.kofarb@o2.pl
kofarb-zamowienia@o2.pl

 

Contact Distribution:

KOFARB DYSTRYBUCJA
ul. Jagiellońska 85/87
42-200 Częstochowa Poland

office@kofarb-dystrybucja.pl

+48 607 055 931 – (RU)
mareks@kofarb-dystrybucja.pl

+48 535 765 331-(IT,EN)
jang@kofarb-dystrybucja.pl

+48 664 283 407 – (AR,EN)
omar@kofarb-dystrybucja.pl

INSTYTUT NOWOCZESNYCH TECHNOLOGII Sp. z o.o.
ul. Obarowska 25/4,
04-337 WARSZAWA
+48 604 957 257
+48 666 318 005
chabior.grzegorz@gmail.com

HELIO Kamil Nowacki
ul. Górna 47
42-274 Aleksandria 1
+ 48 537 444 653
kamil_nowacki@vp.pl

MAP Andrzej Pachucki
ul. Borowa 2/6
41-808 Zabrze
+48 503 085 598
magdalena.pachucka@op.pl

Access map:

Useful links:

  • Contact form
  • Sitemap
  • Privacy Policy
  • Regulations